P4MM4 – read user manual online or download in PDF format. Pages in total: Biostar | P4MM4 | Owner’s Manual | Biostar P4MM4 Owner’s Manual The content of this user’s manual is subject to be changed without notice and we . P4MM4 VIA P4M gaming motherboard features-Socket ;Supports Intel Pentium 4/Celeron D/Celeron Processor;Supports FSB /MHz;Support.
|Published (Last):||1 March 2004|
|PDF File Size:||6.25 Mb|
|ePub File Size:||9.29 Mb|
|Price:||Free* [*Free Regsitration Required]|
Biostar P4MM4 Owner’s Manual |
Following table is only for reference. Wait for five seconds. Remove the power cord from power supply for seconds.
If the testing fail, system will do a fail-safe rebooting.
Half-duplex mode permits transmission in one direction only at a time. Enabled Virus protection is activated. Disabling this option reduces the time it takes to boot-up. A password is required for the system to boot and is also required to access the Setup Utility.
Thermal Monitor 1 defaultThermal Monitor 2. Make sure power cable is securely plugged in. Indicator light on keyboard does not turn on. The user information of peripherals that need to use this area of system memory usually2 discussed their memory buostar.
However, this function is p4m8-m4 recommended not to use. Off Numpad is arrow keys. All the CMOS data will be loaded as defaults setting. We strongly recommend you verify every speed you overclock by click the Verify button. In this case, please double check: Reset your desired password or clear the CMOS data. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Biostar P4M80-M4 User Manual
Power on the system again. Clear the CMOS data. Overclock Panel Click the Mwnual button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Plug in the power cord and boot up the system. To print the manual completely, please, download it. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. This will only apply if passwords are set from the Setup main menu. Date of Month You can choose which month the system will boot up.
Power Management Setup This submenu allows you to configure the power management features. Host cycles that hit the aperture range are forwarded to the AGP without any translation.
By Auto defaultMode 1.
This equipment has been tested and found to comply with the limits of a Class. All hard disks are capable of breaking down at any time.
If the signal has been triggered, it will record to the CMOS and show the giostar on next boot-up. After confirmed, please follow steps below to relief the CPU protection function. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as p4m8-m4 following figure. Then system will do fail-safe reboot by using Watchdog function. Overclock Giostar Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.
Make a bootable floppy disk. These limits are designed to provide reasonable protection against harmful interference in a residential installation. It’s a community-based project which helps to repair anything. If the system shutdown automatically after power p4k80-m4 system for seconds, that means the CPU protection function has been activated. Call the drive manufacturers for compatibility with other drives. System does not boot from hard disk 1.
Hardware Installation Step 3: You will be prompted with to enter a password.